Roll Form Lines

Roll Form Lines

On sheet metal forming lines, the forming process is applied via lateral, parallel or direct pressure that avoids altering the thickness or mechanical properties of the material. We have 5 Roll Form lines in our company, with the capacity to process 100,000 tons of sheet metal per year, producing heavy load uprights, C-C cross beams, diagonal braces, shelves, and back panels.

Production is carried out with the latest technology, using completely robotic and automated systems, in line with customer requests and requirements, in accordance with quality standards, at low cost, with high performance, and on the principle of fast delivery. On the Roll Form line - which has the capacity to produce 7 cross beams per minute - there are a total of 7 robots, 6 welders and 1 stacker. This line, where sheet metal of 1.20-1.50 to 2mm thickness is processed, can produce cross beams with lengths of 1200 to 4000mm.

Sheet metal of 1.50-2.00-2.50-3.00mm thickness is processed on the upright Roll Form line, which has a profile drawing capacity of 15m per minute. Uprights with heights of 1000 to 12000mm are produced on this line. The line incorporates a 100-ton mechanical press that can perform 120 strokes per minute.

Our shelf Roll Form line, which has a production capacity of 6 parts per minute, processes sheet metal of 0.80mm thickness. We produce a total of 45 different variations of shelf width and length. Since our line is fully automatic, the completely finished product is obtained after loading only raw materials.

Our rear panel Roll Form line processes sheet metal of 0,60mm to 1,20mm, and has a production capacity of 8 parts per minute. 54 different types of rear panel are produced, with variations in width, length and surface. Since the line is fully automatic, only raw materials are loaded to obtain completely finished products.

The Roll Form line where we produce diagonal braces to connect pairs of uprights has a profile drawing capacity of 17m per minute. This line, where sheet metal of between 1.50mm and 2mm is processed, produces 6 different cuts of C profile.

Mass production of requested features and dimensions is made on 5 Roll Form lines.